Passive Components Blog
No Result
View All Result
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    Exxelia PM film capacitor and passive-component technologies for BepiColombo space electronics

    Exxelia Passive Components Support BepiColombo Mission

    TT Electronics OPI1268T green through-hole phototransistor optocoupler used for optical isolation in power systems.

    Optocoupler Reliability: Designing Optical Isolation for 25-Year Grid Assets

    TDK B43657 and B43658 ultra-compact snap-in aluminum electrolytic capacitors for 500 V DC power-supply and DC-link applications

    TDK Extends Compact Snap-In Capacitors to 500 V for AI Servers

    Stackpole RNAN aluminium nitride thin-film chip resistors in 0603, 0805, 1206 and 2512 package sizes for precision high-power electronics

    Stackpole RNAN AlN Thin-Film Resistors Reach 6 W

    binder angled M12-A midmount panel-mount PCB connector for centric board mounting, showing compact front-facing industrial connector geometry

    binder Adds Midmount M12-A PCB Connectors for Slim Sensors

    Bourns PST065 and PST10 Series compact incremental potentiometers with hollow shafts for rotary position feedback

    Bourns Expands Compact Incremental Potentiometer Offering

    Wk 35 Electronics Supply Chain Digest

    Samsung MLCC Revenue Seen Above KRW 8T by 2027, Murata EOL Actions Reshape Supply

    ROHM SDR01 high anti-surge thick-film chip resistor in 1005 metric 0402 package with 0.33 W rated power

    ROHM Introduces Anti-Surge 0402 Resistors Rated at 0.33 W

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Resistor Dossier
    • Inductor Dossier
    • Circuit Protection Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    Exxelia PM film capacitor and passive-component technologies for BepiColombo space electronics

    Exxelia Passive Components Support BepiColombo Mission

    TT Electronics OPI1268T green through-hole phototransistor optocoupler used for optical isolation in power systems.

    Optocoupler Reliability: Designing Optical Isolation for 25-Year Grid Assets

    TDK B43657 and B43658 ultra-compact snap-in aluminum electrolytic capacitors for 500 V DC power-supply and DC-link applications

    TDK Extends Compact Snap-In Capacitors to 500 V for AI Servers

    Stackpole RNAN aluminium nitride thin-film chip resistors in 0603, 0805, 1206 and 2512 package sizes for precision high-power electronics

    Stackpole RNAN AlN Thin-Film Resistors Reach 6 W

    binder angled M12-A midmount panel-mount PCB connector for centric board mounting, showing compact front-facing industrial connector geometry

    binder Adds Midmount M12-A PCB Connectors for Slim Sensors

    Bourns PST065 and PST10 Series compact incremental potentiometers with hollow shafts for rotary position feedback

    Bourns Expands Compact Incremental Potentiometer Offering

    Wk 35 Electronics Supply Chain Digest

    Samsung MLCC Revenue Seen Above KRW 8T by 2027, Murata EOL Actions Reshape Supply

    ROHM SDR01 high anti-surge thick-film chip resistor in 1005 metric 0402 package with 0.33 W rated power

    ROHM Introduces Anti-Surge 0402 Resistors Rated at 0.33 W

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Resistor Dossier
    • Inductor Dossier
    • Circuit Protection Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

COTS components in space: overcoming the fear of risk

3.5.2018
Reading Time: 4 mins read
A A

source: Intelligent-Aerospace article

By Dan Friedlander
Retired following 44 years in components engineering

RelatedPosts

Exxelia Passive Components Support BepiColombo Mission

Optocoupler Reliability: Designing Optical Isolation for 25-Year Grid Assets

TDK Extends Compact Snap-In Capacitors to 500 V for AI Servers

Traditional space and military specification (MIL-SPEC) components have long proven to meet the requirements of various aerospace and defense applications; nevertheless, these successes do not come free of failures.

“99 percent of success is built on failure.” — Charles Kettering

The failures helped, among other things, the Electrical, Electronic, and Electromechanical (EEE) component policymakers to prepare entire specification/standards/handbook systems to mitigate the risk of failures. Whoever believes in the myth of “avoid failures” must revisit this term.

Risk is everywhere and the use of any EEE component in any application is not an exception. The greatest risk is really to take no risk at all.

At the timing of the space/MIL/QPL (Qualified Products List) concept establishment, the EEE components global market share (in $) of the space/MIL EEE components was 60 percent. I have difficulties believing the risk of losing availability of components was then on the agenda of the policymakers. They were focused on mitigating technical failures.

Global developments, based on manufacturers’ business decisions, changed completely the space/MIL EEE components market share (in $) to less than 0.1 percent.

This development was the main driver for the courageous William Perry, former U.S. Secretary of Defense, to take the risk and change the policy to use of commercial off-the-shelf (COTS) components in military applications. During his post-decision period, it was field proven that the not-free-of-risk decision was the right one. Unfortunately, the reform did not include space applications. Space applications were exempted, ignoring the issue of insecure components availability.

Although 23 years have passed since the above reform, the path for COTS in space has not yet been officially and fully cleared. Of course, local initiatives are always popping up here and there. The imminent change has not yet been dealt properly. The policy makers are still plagued by myths.

“The risk of a wrong decision is preferable to the terror of indecision.” — Maimonides

The fear of risk
The term “Fear of Risk” is widely spread over the history of human beings. Its meaning is sometimes a positive attribute, depending on its intensity in a given context. Herein I deal with the context of fear of risk of change of policy to back up use of COTS in space.

“Fear to change is the enemy of success.”

In spite of hopefully being aware of the space/MIL components availability status and trend, it seems that the issue is not alarming enough for some leaders. They are still confident that the situation is under control.

“If things seem under control, you are just not going fast enough.” — Mario Andretti

Dealing with COTS within a new methodology is a complex and time-consuming process. Decision delays have a negative impact on establishment in time of a proper infrastructure, based on the experience of the existing space/MIL infrastructure.

Quote: ” If you fail to prepare, you prepare to fail.”

Not being able to find needed EEE components to build space project is a failure to be treated accordingly.
Use of COTS in space dictates culture change. It is worth to consider, better sooner than later, such a change.

“If the risk is fully aligned with your purpose and mission, then it’s worth considering.” — Peter Diamandis

A decision to be taken is not free of risk.

“Risk comes from not knowing what you’re doing.” — Warren Buffett

Even if the involved people are afraid of uncertainty, they are supposed to know what is needed in the future. They should prepare the tools to meet the requirements of the space industry in a worst-case situation.

“Ask yourself if what you are doing today is getting you closer to where you want to be tomorrow”

All of us have the same target: SUCCESS. Success does not come without progressively building it.

“The road to success is always under construction.” — Lily Tomlin

A strategy to reach the target shall be planned and implemented.

“The only way a strategy can get implemented is if we dedicate resources to it.” — Clayton Christensen.

Risk management
Risk is manageable. Nevertheless, everyone knows that there is no such thing as zero risk. Conservatism in today’s dynamic world has its own limits.

“The policy of being too cautious is the greatest risk of all.” — Jawaharlal Nehru

Risk Management is a process of finding ways to mitigate assessed risks. The efficiency of this methodology is measured by the ability to reach an acceptable risk for a specific space mission.

“I think there’s a difference between a gamble and a calculated risk.” — Edmund H. North.

In order to manage risks one should understand very well what he is doing. Risk management is to be understood as a multidisciplinary process, based on deep technical knowledge of component engineering and other relevant disciplines.

“Not taking risks one doesn’t understand is often the best form of risk management.” ― Raghuram G. Rajan

Conclusion
There is an imminent need to decide whether the dealing with the subject of use of COTS in space is satisfactory in terms of time, progress speed, infrastructure, risk management, resistance to change.

It is my opinion that resistance to change is the main factor slowing down the movement to the right direction.

“Resistance at all cost is the most senseless act there is.” — Friedrich Durrenmatt

Global unpredictable events are stronger than any resistance to change.

“The art of life is a constant readjustment to our surroundings.” — Kakuzo Okakaura

Related

Recent Posts

Exxelia PM film capacitor and passive-component technologies for BepiColombo space electronics

Exxelia Passive Components Support BepiColombo Mission

16.9.2026
5

Samsung MLCC Revenue Seen Above KRW 8T by 2027, Murata EOL Actions Reshape Supply

11.9.2026
36
ECIA Industry Pulse Q3 2026 chart showing passive components, semiconductors and electro-mechanical component market sentiment and lead-time pressure

ECIA Industry Pulse Moderates as Passive Lead Times Tighten

10.9.2026
33

Emerging Capacitor Markets in Fusion Energy

10.9.2026
51
onsemi solid-state transformer concept for 800 V HVDC AI data center power conversion with SiC modules, DC-link capacitors and high-frequency magnetics

Solid-State Transformers for 800 V AI Data Centers: Passive Component Design Considerations

9.9.2026
108
Compact inductive rotary position encoder sensor near a motor shaft, representing the Vishay RAIK045I MP encoder category

Vishay Introduces 16-Bit Inductive Encoder for Motor-Adjacent Position Sensing

9.9.2026
20

August 2026 Interconnect, Passives and Electromechanical Components Market Insights

4.9.2026
57

Knowles Cornell Dubilier 105C Flatpack Aluminum Electrolytic Capacitors Target Low-Profile High-Density Power Designs

4.9.2026
45

Vishay Thin Film Chip Resistors Combine up to 50 GHz Operation with High Power Density

3.9.2026
17

Upcoming Events

Sep 16
17:00 - 18:00 CEST

Designing a 5 kW, 800 V-to-50 V PSFB Converter for Next-Generation Data Centers

Sep 29
16:00 - 17:00 CEST

Cybersecurity 2026

Nov 24
16:00 - 17:00 CET

Component selection with the WE REDEXPERT® DC-DC Converter Designer Tool

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Earthing Systems and IEC Classification Explained

    0 shares
    Share 0 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • Resistor Symbols

    0 shares
    Share 0 Tweet 0
  • Capacitor Charging and Discharging

    0 shares
    Share 0 Tweet 0
  • Audio Capacitors: Choosing Capacitors for Crossover Circuits

    0 shares
    Share 0 Tweet 0
  • Capacitor Symbols

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© 2015–2026
All rights reserved

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • Dossiers
  • PCNS

© 2015–2026
All rights reserved