Passive Components Blog
No Result
View All Result
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Exxelia Presents Disc Capacitors and Integrated Magnetics for Space

    Vishay 259 PHM-SI cylindrical aluminum electrolytic capacitors with blue insulating sleeves and snap-in terminals

    Vishay Adds 550 V and 600 V Snap-In Capacitors

    illustrative image of film capacitors close to a circuit board

    2026 Capacitor Price Shock: Where Film Capacitors Fit

    Exploded view of the Nisshinbo Silicon Motherboard: functional chip, silicon substrate, insulating layer, printed wiring, external passive parts and frame

    Nisshinbo Silicon Motherboard Integrates ICs and Passives

    Murata MGJ2T2 SIP isolated DC-DC converter for SiC gate-drive power

    Murata Unveils Isolated DC-DC for SiC Gate Drives

    Simplified buck, boost, flyback and isolated buck power-stage schematics showing switches, inductors, coupled magnetics, diodes and output capacitors.

    SMPS Topology Selection: From Buck and Boost to Flyback and LLC

    Littelfuse AK-FB and AK-A high-power TVS diodes in axial-leaded packages

    Littelfuse Introduces TVS Diodes for HVDC Protection

    Wk 46 Electronics Supply Chain Digest

    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Exxelia Presents Disc Capacitors and Integrated Magnetics for Space

    Vishay 259 PHM-SI cylindrical aluminum electrolytic capacitors with blue insulating sleeves and snap-in terminals

    Vishay Adds 550 V and 600 V Snap-In Capacitors

    illustrative image of film capacitors close to a circuit board

    2026 Capacitor Price Shock: Where Film Capacitors Fit

    Exploded view of the Nisshinbo Silicon Motherboard: functional chip, silicon substrate, insulating layer, printed wiring, external passive parts and frame

    Nisshinbo Silicon Motherboard Integrates ICs and Passives

    Murata MGJ2T2 SIP isolated DC-DC converter for SiC gate-drive power

    Murata Unveils Isolated DC-DC for SiC Gate Drives

    Simplified buck, boost, flyback and isolated buck power-stage schematics showing switches, inductors, coupled magnetics, diodes and output capacitors.

    SMPS Topology Selection: From Buck and Boost to Flyback and LLC

    Littelfuse AK-FB and AK-A high-power TVS diodes in axial-leaded packages

    Littelfuse Introduces TVS Diodes for HVDC Protection

    Wk 46 Electronics Supply Chain Digest

    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

Exxelia Presents Disc Capacitors and Integrated Magnetics for Space

18.11.2026
Reading Time: 8 mins read
A A

Exxelia is showcasing CalRamic CRT-0020 single-layer ceramic disc capacitors and Smart Integrated Magnetics for space power electronics at Space Tech Expo Europe 2026.

The technologies address different circuit functions: high-voltage capacitive coupling, snubbing and pulse operation, and transformer–inductor integration for isolated power conversion. Exxelia wider portfolio includes stacked ceramic, polymer tantalum and wet tantalum capacitors for filtering, energy storage and power conversion.

RelatedPosts

Exxelia Brings High-Temperature Passives to Electronica 2026

Exxelia Passive Components Support BepiColombo Mission

Exxelia Offers 1200V Capacitors and Magnetics for 800V Aerospace Platforms

Key features and benefits

  • CalRamic CRT-0020 capacitors use conformally coated, radial-leaded, single-layer ceramic disc construction, with DC voltage ratings from 3 kV to 20 kV.
  • CRT-0020 devices receive 100% Group A inspection, including partial-discharge testing.
  • Smart Integrated Magnetics combine high-frequency transformer and inductor functions in a custom planar assembly.
  • CNC5X stacked ceramic capacitors cover 100 nF to 180 µF and 63 V to 500 V DC, with surface-mount and through-hole termination options.
  • CTP21 polymer tantalum capacitors provide component-specific ESR and ripple-current ratings for power-supply filtering.
  • ST79 HT200 wet tantalum capacitors use hermetically sealed tantalum cases and operate over −55 °C to +200 °C.

Technical highlights

CalRamic CRT-0020 high-voltage disc capacitors

The CRT-0020 family comprises high-voltage ceramic capacitors for aerospace and defence circuits manufactured using double-action pressing to minimise density gradients within the ceramic dielectric.

ParameterCRT-0020
ConstructionSingle-layer ceramic disc
MountingRadial leads
CoatingConformal
Rated DC voltage3–20 kV
Capacitance range1.6 pF–0.045 µF
Operating temperature−55 °C to +125 °C
Dielectric optionsNPO, X5R, X7R, X5U, Z5U

Dielectric selection governs the balance between capacitance precision and dielectric loss. NPO versions address applications requiring tighter capacitance control and lower dielectric losses. Class II versions accommodate applications that can tolerate greater dielectric loss and less precision.

Target circuit positions include switching-power-supply snubbers, coupling and decoupling networks, inverter circuitry and high-voltage pulse circuits. The 3–20 kV DC rating range makes voltage withstand a central selection parameter alongside dielectric choice and capacitance.

Group A testing and Group B inspection, when required, follow applicable requirements of MIL-PRF-49467, DSCC 87125, DSCC 89087 and NASA GSFC S-311-15C. Ultrasonic C-SAM examination is an available screening option.

Smart Integrated Magnetics for isolated conversion

Smart Integrated Magnetics combine the transformer and inductor of a Dual Active Bridge converter within a single magnetic assembly. This integrated transformer–inductor approach brings the electrical, thermal and mechanical design of both functions into one custom development.

An example space-power implementation has the following characteristics:

ParameterExample implementation
Converter topologyDual Active Bridge
Power level1–2 kW
Switching frequency100–200 kHz
InductanceA few µH
Assembly dimensionsApproximately 75 × 65 × 20 mm
MassApproximately 250 g
Efficiency at nominal conditionsClose to 99%

These values describe a custom implementation rather than a standard catalogue series. Electrical requirements, winding architecture, magnetic coupling, thermal behaviour and mechanical interfaces are developed together at system level.

Target systems include power conditioning and distribution units, power processing units, and battery charge and discharge regulators in satellites and launch vehicles. The broader integrated-magnetics offering also addresses phase-shift full-bridge, LLC and coupled-inductor configurations.

Capacitor options around the conversion stage

The supporting capacitor families address different combinations of voltage, capacitance, temperature and mounting requirements.

FamilyCapacitance rangeRated DC voltageOperating temperature
CNC5X100 nF–180 µF63–500 V−55 °C to +125 °C
CTP2147–560 µF16–75 V−55 °C to +105 °C
ST79 HT20010–1,800 µF25–125 V−55 °C to +200 °C
TCF10 pF–39 µF200 V–10 kV−55 °C to +125 °C
TKD10 pF–39 µF200 V–10 kV−55 °C to +125 °C

CNC5X capacitors use Class II X7R multilayer ceramic chips in stacked assemblies. Capacitance tolerances are ±10% or ±20%. P, PL and L terminations support surface mounting, while N versions use through-hole leads. Typical applications include switch-mode power supplies, DC/DC converters and filtering.

CTP21 capacitors are polarised, moulded SMD polymer tantalum devices. A 560 µF, 16 V version has a maximum ESR of 30 mΩ and a maximum RMS ripple-current rating of 3.7 A, both at 100 kHz and +20 °C. Its category voltage falls to 12 V at +105 °C, illustrating why temperature and operating voltage must be selected together.

ST79 HT200 capacitors combine axial mounting, hermetic tantalum cases and ±10% or ±20% capacitance tolerance. Target functions include backup, energy conversion and filtering.

TCF and TKD capacitors use conformally coated radial construction. Both families address power supplies, voltage multipliers and DC/DC converters; TKD also targets pulse applications.

Application fit

High-voltage snubbing and pulse circuitry

CRT-0020 addresses high-voltage snubbing, coupling, decoupling and pulse functions with DC ratings extending to 20 kV. NPO and Class II dielectric options allow selection around the circuit’s capacitance-precision and dielectric-loss requirements.

TCF and TKD provide additional radial-leaded ceramic options with ratings extending to 10 kV. TKD includes NPO, X7R and C4XX dielectric options, making dielectric behaviour another selection axis alongside voltage, capacitance and tolerance.

Converter filtering and energy storage

CNC5X combines a 100 nF–180 µF capacitance range with 63–500 V DC ratings for switch-mode power supplies, DC/DC conversion and filtering. Termination style determines whether the assembly fits a surface-mount or through-hole layout.

CTP21 addresses power-supply filtering and energy conversion where the selected capacitance–voltage combination must also satisfy ESR and ripple-current requirements. The 560 µF, 16 V example provides a concrete selection point, while its lower category voltage at elevated temperature constrains the operating envelope.

ST79 HT200 extends the temperature range to +200 °C for backup, energy-conversion and filtering functions requiring wet tantalum construction.

Space power-conversion assemblies

The custom Smart Integrated Magnetics implementation targets isolated DC/DC conversion in space power conditioning and distribution units. Its example 1–2 kW power level and 100–200 kHz switching range provide a starting point for system co-design, with the approximately 75 × 65 × 20 mm assembly envelope linking the magnetic design to mechanical integration.

Design-in notes for engineers

  • Select CRT-0020 dielectric material around capacitance precision and dielectric loss, not voltage rating alone.
  • Assess supplemental encapsulation for higher-voltage CRT-0020 parts to prevent surface arcing and breakdown. Encapsulant selection and processing must avoid mechanical stress on the ceramic.
  • Protect ceramic disc capacitors from thermal and mechanical shock during handling and installation.
  • For CNC5X, select the termination arrangement before fixing the PCB layout and assembly process.
  • For CTP21, use the selected component’s temperature-dependent voltage limit, ESR and ripple-current conditions. Preserve polarity in the schematic and land pattern.
  • Define integrated-magnetics electrical, thermal and mechanical requirements together, including the intended topology, switching frequency and module interface.
  • Establish the required screening and qualification plan alongside the procurement configuration.
  • Validate final component selection under the actual operating conditions before schematic, layout or production release.

Further reading

  • Aerospace and Defense Passive Components Dossier
  • Radiation Tolerance of Tantalum and Ceramic Capacitors
  • Power Converter Dossier

Source

This article is based on the Exxelia product announcement and official product documentation. Engineers should refer to the current manufacturer datasheet for final design and qualification.

References

  1. Exxelia to showcase CalRamic Single Layer Disc capacitors and Smart Integrated Magnetics solutions for space applications at Space Tech Expo Europe 2026, Exxelia, 17 November 2026.
  2. CRT-0020: High Voltage Radial Leaded Disc Capacitors, Exxelia CalRamic, Rev 2310.
  3. CalRamic CRT-0020, Exxelia.
  4. Smart Integrated Magnetics for Space Power Conversion, Exxelia.
  5. CNC5X Series datasheet, Exxelia.
  6. CNC5X Series, Exxelia.
  7. CTP21: Solid Tantalum Polymer Capacitors, Exxelia,
  8. CTP21, Exxelia.
  9. ST79 HT200, Exxelia.
  10. TCF Series, Exxelia.
  11. TKD Series, Exxelia.

Related

Recent Posts

Vishay 259 PHM-SI cylindrical aluminum electrolytic capacitors with blue insulating sleeves and snap-in terminals

Vishay Adds 550 V and 600 V Snap-In Capacitors

18.11.2026
1
illustrative image of film capacitors close to a circuit board

2026 Capacitor Price Shock: Where Film Capacitors Fit

17.11.2026
17
Murata MGJ2T2 SIP isolated DC-DC converter for SiC gate-drive power

Murata Unveils Isolated DC-DC for SiC Gate Drives

17.11.2026
12
Simplified buck, boost, flyback and isolated buck power-stage schematics showing switches, inductors, coupled magnetics, diodes and output capacitors.

SMPS Topology Selection: From Buck and Boost to Flyback and LLC

16.11.2026
21
VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

12.11.2026
76
Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

11.11.2026
34
Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

10.11.2026
35
Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

Tantalum Anode Design Combines Structural Benchmarks and Modeling

9.11.2026
29
Illustration of a thin-film capacitor stack with TiN electrodes and an ultrathin hafnium zirconium oxide ferroelectric layer on silicon

Sub-Volt Ferroelectric HZO Capacitor Pairs Speed and Endurance

6.11.2026
28

Upcoming Events

Nov 24
16:00 - 17:00 CET

Select the Correct Components for Your DC/DC Converter

Dec 1
16:00 - 17:00 CET

Developing low-noise mixed-signal systems

Dec 8
16:00 - 17:00 CET

WE-CCMF: Design Principles, Layout Guidelines and Measurement Results for High-Speed EMI Filtering

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • September 2026 Interconnect, Passives and Electromechanical Components Market Insights

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Capacitor Charging and Discharging

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • RF Connector Types: How To Choose the Right One

    0 shares
    Share 0 Tweet 0
  • Passive Low Pass Filters: Fundamentals and EMI Design

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • Capacitor Symbols

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© 2015–2026
All rights reserved

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • Dossiers
  • PCNS

© 2015–2026
All rights reserved