Polymer Materials and Processing
The majority of connector housings are manufactured from thermoplastic polymers due to their combination of electrical and mechanical properties and ...
The majority of connector housings are manufactured from thermoplastic polymers due to their combination of electrical and mechanical properties and ...
What is an RF Signal? First, we should define what RF stands for. An RF (Radio Frequency) signal refers to an alternating ...
This section will provide a basic discussion of connector materials and manufacturing processes. Chapter I/1.4.1 Contact Finish Electroplating on contact ...
The majority of connector contacts are manufactured from copper alloys due to the combination of high electrical conductivity and good ...
As noted, the current rating of a contact is determined by the T-rise as a function of current. The T-rise ...
Power applications are generally considered “high current/voltage” applications. There are also two aspects to power applications. The first addresses the ...
It was noted in the introduction to this Chapter that in many cases the requirements on a connector for signal ...
To discuss connector applications, recall from 1.1 the following functional definition of a connector: “A connector is an electromechanical system ...
DefinitionPower Over Ethernet (POE) technology allows VoIP phones, WLAN access, IP camera … to receive power as well as data ...
Basic PrinciplesIn an Ethernet network, all systems are connected to a single transmission line. There are some physical layouts, depending ...
© EPCI - Leading Passive Components Educational and Information Site
© EPCI - Leading Passive Components Educational and Information Site