Passive Components Blog
No Result
View All Result
  • Home
  • NewsFilter
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Bourns Unveils High Volt GDT for High‑Energy Surge Protection

    TDK Releases DC Link Aluminum Capacitors for EV On‑Board Chargers

    Capacitech C-Link Supercapacitors for AI Data Center Voltage Spikes Mitigation

    Wk 8 Electronics Supply Chain Digest

    Modelithics Library for MATLAB: Measurement-Based Models for Microwave and RF Passive Components

    Bourns Extends Multilayer Chip Inductors Offer for RF and Wireless Designs

    Researchers developed a polymer capacitor by combining two cheap, commercially available plastics. The new polymer capacitor makes use of the transparent material — pictured here, with vintage Penn State athletic marks visible through it — to store four times the energy and withstand significantly more heat.  Credit: Penn State

    Penn State Demonstrated Polymer Alloy Capacitor Film with 4× Energy Density up to 250C

    ECIA January 2026 Reports Strong Sales Confidence

    Vishay Unveils Ultra-Compact 0201 Thick Film Chip Resistors

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • VideoFilter
    • All
    • Antenna videos
    • Capacitor videos
    • Circuit Protection Video
    • Filter videos
    • Fuse videos
    • Inductor videos
    • Inter-Connect Video
    • Non-linear passives videos
    • Oscillator videos
    • Passive sensors videos
    • Resistor videos

    2026 Power Magnetics Design Trends: Flyback, DAB and Planar

    Enabling Software‑Defined Vehicle Architectures: Automotive Ethernet and Zonal Smart Power

    Calculating Resistance Value of a Flyback RC Snubber 

    One‑Pulse Characterization of Nonlinear Power Inductors

    Thermistor Linearization Challenges

    Coaxial Connectors and How to Connect with PCB

    PCB Manufacturing, Test Methods, Quality and Reliability

    Transformer Behavior – Current Transfer and Hidden Feedback

    Choosing the Right Capacitor: The Importance of Accurate Measurements

    Trending Tags

    • Capacitors explained
    • Inductors explained
    • Resistors explained
    • Filters explained
    • Application Video Guidelines
    • EMC
    • New Products
    • Ripple Current
    • Simulation
    • Tantalum vs Ceramic
  • Knowledge Blog
  • DossiersNew
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • NewsFilter
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Bourns Unveils High Volt GDT for High‑Energy Surge Protection

    TDK Releases DC Link Aluminum Capacitors for EV On‑Board Chargers

    Capacitech C-Link Supercapacitors for AI Data Center Voltage Spikes Mitigation

    Wk 8 Electronics Supply Chain Digest

    Modelithics Library for MATLAB: Measurement-Based Models for Microwave and RF Passive Components

    Bourns Extends Multilayer Chip Inductors Offer for RF and Wireless Designs

    Researchers developed a polymer capacitor by combining two cheap, commercially available plastics. The new polymer capacitor makes use of the transparent material — pictured here, with vintage Penn State athletic marks visible through it — to store four times the energy and withstand significantly more heat.  Credit: Penn State

    Penn State Demonstrated Polymer Alloy Capacitor Film with 4× Energy Density up to 250C

    ECIA January 2026 Reports Strong Sales Confidence

    Vishay Unveils Ultra-Compact 0201 Thick Film Chip Resistors

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • VideoFilter
    • All
    • Antenna videos
    • Capacitor videos
    • Circuit Protection Video
    • Filter videos
    • Fuse videos
    • Inductor videos
    • Inter-Connect Video
    • Non-linear passives videos
    • Oscillator videos
    • Passive sensors videos
    • Resistor videos

    2026 Power Magnetics Design Trends: Flyback, DAB and Planar

    Enabling Software‑Defined Vehicle Architectures: Automotive Ethernet and Zonal Smart Power

    Calculating Resistance Value of a Flyback RC Snubber 

    One‑Pulse Characterization of Nonlinear Power Inductors

    Thermistor Linearization Challenges

    Coaxial Connectors and How to Connect with PCB

    PCB Manufacturing, Test Methods, Quality and Reliability

    Transformer Behavior – Current Transfer and Hidden Feedback

    Choosing the Right Capacitor: The Importance of Accurate Measurements

    Trending Tags

    • Capacitors explained
    • Inductors explained
    • Resistors explained
    • Filters explained
    • Application Video Guidelines
    • EMC
    • New Products
    • Ripple Current
    • Simulation
    • Tantalum vs Ceramic
  • Knowledge Blog
  • DossiersNew
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

Skeleton Supercapacitors Power New IndyCar Hybrid Racing

29.7.2024
Reading Time: 3 mins read
A A

Skeleton’s cutting-edge supercapacitors are now integrated into the NTT IndyCar Series innovative Energy Recovery System (ERS). All racecars are equipped with this new hybrid system, which made its competition debut at the Honda Indy 200 at Mid-Ohio on July 7th, 2024.

Skeleton Technologies has designed and manufactured the high-performance supercapacitors commissioned by Honda Racing Corporation USA (HRC US) as the new Energy Storage System (ESS), a component of the overall ERS, which also incorporates a Motor Generator Unit. HRC US helped manage this collaborative effort among industry leaders enabling IndyCar participants to embrace hybrid racing technologies. 

RelatedPosts

Skeleton Technologies Expands in U.S. to Power AI Data Centers

Skeleton Opens €220M Supercapacitor Leipzig Factory

Skeleton Opens SuperBattery Factory in Finland 

David Arsenault, Senior Vice-President of Business Development at Skeleton Technologies, says: “We are excited to collaborate with Honda Racing Corporation USA and play a pivotal role in this ground-breaking development in the NTT IndyCar Series. Motorsports are more than just about speed, precision and a thrilling spectacle. They set a standard for technological innovation in the automotive industry. This collaboration with HRC US and other industry leaders highlights our commitment to advancing energy storage technology and pushing the boundaries of performance in motorsports. We now look forward to continuing our partnership with HRC USA and contributing to the evolution of hybrid racing technology.”

This new technology opens a new era of NTT IndyCar Series electrified hybrid racing, promising enhanced efficiency and power. By leveraging cutting-edge supercapacitor technology, the ERS optimizes energy capture and deployment, providing a substantial performance boost while maintaining the integrity and footprint of the traditional powertrain. 

David Salters, President of Honda Racing Corporation USA explains: “We have had a superb collaboration with Skeleton. Using Skeleton’s advanced supercapacitor technology, we have been able to test out something novel and unique, which is what racing is for. We are also particularly glad we executed this project in a short time. There are many other promising technologies that Skeleton is working on, so we are looking forward to continuing this collaboration and innovate further together.”

The Energy Storage System is composed of 20 supercapacitors developed and supplied by Skeleton Technologies. These supercapacitors were specifically chosen for their unparalleled ability to capture and deploy energy rapidly, which is crucial in high-speed racing environments. The ESS can fully charge and discharge in approximately 4.5 seconds, providing drivers with an additional 60 horsepower to enhance their performance on the track. This rapid energy transfer capability not only improves the vehicle’s acceleration and power during critical moments but also contributes to more consistent and sustainable performance throughout the race. 

The ESS developed by HRC US is one of the major components of the energy recovery system, alongside the Motor Generator Unit, produced by EMPEL in collaboration with Chevrolet and Ilmor, the DC/DC converter, produced by BrightLoop, and the voltage control device. These components work together with the existing engine control unit provided by McLaren Applied, ensuring optimal performance and reliability. 

The innovative design of the ERS captures energy typically lost during braking, storing it efficiently within the supercapacitors. This stored energy is then available for drivers to deploy manually, providing a powerful boost during crucial moments such as overtaking.

Additionally, the system’s ability to start or restart the car autonomously without external assistance not only reduces race interruptions but also minimizes the risks associated with trackside assistance. This feature helped prevent a caution in the closing stages of the Honda Indy 200 at Mid-Ohio when a driver was able to fire up his car again with the hybrid – instead of the previous set-up of waiting for the safety team to arrive, which in turn would require a caution. This episode underscores the dual benefits of the ERS: enhanced competitive performance and improved safety standards in high-stakes racing environments.

Related

Source: Skeleton Technologies

Recent Posts

TDK Releases DC Link Aluminum Capacitors for EV On‑Board Chargers

23.2.2026
1

Capacitech C-Link Supercapacitors for AI Data Center Voltage Spikes Mitigation

23.2.2026
2
Researchers developed a polymer capacitor by combining two cheap, commercially available plastics. The new polymer capacitor makes use of the transparent material — pictured here, with vintage Penn State athletic marks visible through it — to store four times the energy and withstand significantly more heat.  Credit: Penn State

Penn State Demonstrated Polymer Alloy Capacitor Film with 4× Energy Density up to 250C

19.2.2026
24

ECIA January 2026 Reports Strong Sales Confidence

19.2.2026
30

Vishay Unveils Ultra-Compact 0201 Thick Film Chip Resistors

19.2.2026
11

Würth Elektronik Component Data Live in Accuris

19.2.2026
16

Coilcraft Releases Automotive Common Mode Chokes

19.2.2026
14

MLCC Manufacturers Consider Price Increase as AI Demand Outpaces Supply

18.2.2026
221

SCHURTER Introduces 2410 SMD Fuse for Robust AC/DC Protection

17.2.2026
13

Upcoming Events

Feb 24
16:00 - 17:00 CET

Mastering Galvanic Isolation: Ensuring Safety in Power Electronics

Feb 25
16:00 - 17:00 CET

Magnetic Modeling – How Frenetic Models Magnetics

Mar 3
16:00 - 17:00 CET

Cybersecurity at the Eleventh Hour – from RED to CRA – Information and Discussion

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Ripple Current and its Effects on the Performance of Capacitors

    3 shares
    Share 3 Tweet 0
  • Dual Active Bridge (DAB) Topology

    0 shares
    Share 0 Tweet 0
  • What is a Dielectric Constant and DF of Plastic Materials?

    4 shares
    Share 4 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • MLCC Case Sizes Standards Explained

    0 shares
    Share 0 Tweet 0
  • SEPIC Converter Design and Calculation

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© EPCI - Leading Passive Components Educational and Information Site

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • PCNS

© EPCI - Leading Passive Components Educational and Information Site

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.
Go to mobile version