The classic noble metal contact finish system is gold over nickel as discussed in Chapter II/2.1.2 Contact Finish Degradation Mechanisms. ...

Tin and silver are the two most common used non-noble finishes. Tin finishes are used in a wide range of ...

Selection of an appropriate finish system for a given connector application requires consideration of a number of connector and application ...

Connector contact lubricants are used to provide two different performance benefits; reduction in friction and corrosion protection. Reducing friction will ...

Silver surfaces react with sulfur and chlorine. Silver sulfide films, tarnish, are readily displaced on connector mating, but have been ...

As noted previously, nickel surfaces always consist of a self limiting and very thin layer of nickel oxide, 0.01 µm ...

For completeness it should be noted that there are several fretting degradation mechanisms: Fretting WearAll fretting motions will cause some ...

Because tin is the most commonly used non-noble contact finish, it will be the focus of this chapter. Silver and ...

Nickel underplates in noble metal finishes provide another very important performance benefit that is not related to corrosion. The durability ...

Noble metal finish degradation mechanisms include both corrosion and wear, with wear through of the noble metal leading to increased ...