As per the IPC-A-610D, a compliant solder joint must fill at least 75% of the free volume between the pin ...

As noted previously, the THR reflow practice is basically identical to the SMT reflow practice. As such, it can be ...

Whenever possible, it is desirable to use automatic pick and place technologies to insert the connectors into the PCB PTH. ...

Basically, pins can be round or any rectangular shape, as shown in Figure 2.95. The pin geometry plays an important ...

The solder paste is applied to the PCB and a subsequent squeegee pass is used to push the paste into ...

TDK Corporation announced the development of its KCZ1210AH series of miniaturized common-mode filters for automotive applications. The series is extremely ...

Geelsu Hwang of the School of Dental Medicine and colleagues are developing a smart dental implant that resists bacterial growth ...

Stackpole Electronics’ CSRT2512-UP was developed to provide accurate, high power current sensing for elaborate electronic devices that exceed the capabilities ...

The solder paste volume on the PCB surface will be determined by the thickness and area of the stencil opening. ...

The screen printing process is particularly important because it determines the amount of solder paste that will be applied to ...