Passive Components Blog
No Result
View All Result
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Stackpole RPCQ thick-film chip resistors in rectangular surface-mount packages with end terminations

    Stackpole Releases Pulse-Withstanding Chip Resistors up to 4 W

    Bourns CRT-G thin film chip resistor illustration with a rectangular body and metallic end terminations

    Bourns Introduces Precision Thin Film Resistors for Measurement

    Würth Elektronik ABC of Thermal Management textbook

    Würth Elektronik Launches ABC of Thermal Management Guide

    Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

    Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

    Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

    Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

    Bourns Releases 450 V DC Bus TVS Diode

    YAGEO Nexensos M422 Pb-free platinum RTD graphic showing the operating temperature range, nominal resistance options and joining methods.

    YAGEO Introduces Pb-Free Platinum RTD Temperature Sensor

    Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

    Tantalum Anode Design Combines Structural Benchmarks and Modeling

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Stackpole RPCQ thick-film chip resistors in rectangular surface-mount packages with end terminations

    Stackpole Releases Pulse-Withstanding Chip Resistors up to 4 W

    Bourns CRT-G thin film chip resistor illustration with a rectangular body and metallic end terminations

    Bourns Introduces Precision Thin Film Resistors for Measurement

    Würth Elektronik ABC of Thermal Management textbook

    Würth Elektronik Launches ABC of Thermal Management Guide

    Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

    Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

    Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

    Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

    Bourns Releases 450 V DC Bus TVS Diode

    YAGEO Nexensos M422 Pb-free platinum RTD graphic showing the operating temperature range, nominal resistance options and joining methods.

    YAGEO Introduces Pb-Free Platinum RTD Temperature Sensor

    Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

    Tantalum Anode Design Combines Structural Benchmarks and Modeling

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

Samsung Adds 0402 10 µF X7T MLCC for ADAS Power Rails

27.10.2026
Reading Time: 5 mins read
A A
Samsung Electro-Mechanics CL05Z106MS66PN automotive MLCC illustration with a rectangular ceramic body and metal end terminations

Samsung Electro-Mechanics has introduced the CL05Z106MS66PN# automotive multilayer ceramic capacitor, combining 10 µF nominal capacitance and a 2.5 V rating in a 0402-inch package measuring 1.0 × 0.5 mm.

The Samsung Electro-Mechanics device extends the automotive X7T MLCC range for ADAS electronics, where SoC power requirements and restricted mounting space drive capacitor selection.

RelatedPosts

Samsung Electro-Mechanics Patent Targets to Reduce Moisture and Cracks in High-Capacity MLCCs

Samsung 100V Molded Frame MLCC Targets 48V AI Server PSUs

Samsung Low-Profile and Embedded MLCCs for Compact Devices

Key features and benefits

  • 10 µF nominal capacitance in a 0402-inch / 1005-metric case.
  • 2.5 V rated voltage for low-voltage circuit positions.
  • X7T temperature characteristic covering −55 °C to +125 °C.
  • Automotive product meeting AEC-Q200 requirements.
  • Mass production underway, with samples and technical support available.
  • Related 0603-inch devices provide 22 µF at rated voltages of 2.5 V and 4 V.

Technical highlights

The new combination is 10 µF at 2.5 V in the 0402-inch case. The associated 22 µF products use a 0603-inch / 1608-metric case with nominal length and width of 1.6 × 0.8 mm.

Part numberCase size, inch / metricNominal capacitanceRated voltage
CL05Z106MS66PN#0402 / 100510 µF2.5 V
CL10Z226MS96PN#0603 / 160822 µF2.5 V DC
CL10Z226MR96PN#0603 / 160822 µF4 V DC

All three devices have X7T temperature characteristics and are in mass production. The two 0603 devices have ±20% capacitance tolerance and length, width and thickness dimensions of 1.60 ±0.20 × 0.80 ±0.20 × 0.80 ±0.20 mm. The “#” suffix denotes the packaging code.

Temperature behaviour and effective capacitance

X7T permits a temperature-related capacitance change of −33% to +22% across −55 °C to +125 °C. This temperature characteristic is distinct from initial capacitance tolerance and does not represent the capacitance retained under DC operating voltage.

Class II MLCC capacitance decreases with applied DC voltage. The DC bias characteristics of ceramic capacitors therefore matter when translating the 10 µF nominal value into a decoupling requirement. Applied voltage, temperature and AC signal level should be considered together when establishing the effective capacitance available in circuit.

Impedance also governs decoupling performance. An MLCC includes equivalent series resistance and equivalent series inductance alongside its capacitance. Its response changes with frequency, so nominal capacitance alone does not determine how effectively it suppresses power-rail noise.

Typical applications and application fit

Target applications include automotive ADAS electronics, sensors, radar systems and SoC power networks. The 10 µF, 2.5 V device addresses low-voltage capacitor positions where a 1.0 × 0.5 mm body is relevant to the placement budget.

For SoC supply decoupling, selection should begin with the required effective capacitance and power-network impedance at the operating voltage. The 0402 device combines the 10 µF nominal value with the smaller case; the related 0603 devices provide 22 µF nominal capacitance, including a 4 V option. These are separate electrical and mechanical choices rather than interchangeable footprints.

The X7T temperature range supports selection for electronics operating between −55 °C and +125 °C. Local component temperature and temperature-dependent capacitance remain part of the circuit assessment, particularly near heat-generating processors and power-management devices.

Design-in notes for engineers

  • Match the operating voltage to the selected 2.5 V or 4 V rating. Include voltage excursions in the electrical assessment rather than selecting from the nominal rail voltage alone.
  • Establish the required effective capacitance at the applied DC voltage, temperature and AC signal level. Keep the X7T temperature window separate from initial tolerance.
  • Assess impedance over the frequencies relevant to the power network. Place decoupling MLCCs close to the supplied IC to limit the inductance of the connection.
  • Match the PCB footprint and assembly clearances to the selected case dimensions. A 0402 device and a 0603 device require different layout provisions.
  • Validate final selection under the actual electrical, thermal and assembly conditions before production release.

Further reading

  • Samsung Electro-Mechanics Releases 0201 X7T 1uF 6.3V MLCC for ADAS Applications
  • Samsung Introduces Automotive 1206 100uF X7T MLCC for Power Rails in ADAS and SoCs

Source

This article is based on the Samsung Electro-Mechanics product announcement and official product documentation. Engineers should refer to the current manufacturer datasheet for final design and qualification.

References

  1. Samsung Electro-Mechanics Launches an Ultra-High-Capacitance MLCC for ADAS (0402 inch, X7T, 10uF, 2.5V), Samsung Electro-Mechanics, 21 October 2026.
  2. CL10Z226MS96PN# — MLCC Product Information, Samsung Electro-Mechanics.
  3. CL10Z226MR96PN# — MLCC Product Information, Samsung Electro-Mechanics.
  4. Multilayer Ceramic Capacitors — Part II: Automotive, Samsung Electro-Mechanics, December 2025.
  5. Product FAQ, Samsung Electro-Mechanics.

Related

Recent Posts

Stackpole RPCQ thick-film chip resistors in rectangular surface-mount packages with end terminations

Stackpole Releases Pulse-Withstanding Chip Resistors up to 4 W

12.11.2026
14
Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

11.11.2026
28
Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

10.11.2026
30
Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

Tantalum Anode Design Combines Structural Benchmarks and Modeling

9.11.2026
26
Illustration of a thin-film capacitor stack with TiN electrodes and an ultrathin hafnium zirconium oxide ferroelectric layer on silicon

Sub-Volt Ferroelectric HZO Capacitor Pairs Speed and Endurance

6.11.2026
25
Cut-open lithium-ion capacitor pouch cell showing stacked carbon electrodes and separators, with vials of carbon powder

Lithium-Ion Capacitor Review Backs Hard Carbon//AC Pairing

6.11.2026
25
Rack power shelf in an AI data center with film DC-link capacitors, a supercapacitor bank and a converter board

800 VDC AI Data Centers Reshape Capacitor Demand for 2027

6.11.2026
96
YAGEO PMT6397 push-pull transformer with a segmented toroidal winding and surface-mount terminals

YAGEO Releases Push-Pull Transformers for Isolated 3 W Supplies

5.11.2026
20
Bourns PWR163 DPAK-style surface-mount power resistor with moulded housing, metal backplate and terminals

Bourns Releases Power Resistor Adds Reverse-Pin Configuration

3.11.2026
11

Upcoming Events

Nov 24
16:00 - 17:00 CET

Select the Correct Components for Your DC/DC Converter

Dec 1
16:00 - 17:00 CET

Developing low-noise mixed-signal systems

Dec 8
16:00 - 17:00 CET

WE-CCMF: Design Principles, Layout Guidelines and Measurement Results for High-Speed EMI Filtering

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • September 2026 Interconnect, Passives and Electromechanical Components Market Insights

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Capacitor Charging and Discharging

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • RF Connector Types: How To Choose the Right One

    0 shares
    Share 0 Tweet 0
  • Passive Low Pass Filters: Fundamentals and EMI Design

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • Audio Capacitors: Choosing Capacitors for Crossover Circuits

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© 2015–2026
All rights reserved

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • Dossiers
  • PCNS

© 2015–2026
All rights reserved