Passive Components Blog
No Result
View All Result
  • Home
  • NewsFilter
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Transformer Safety IEC 61558 Standard

    ESR of Capacitors, Measurements and Applications

    Murata Christophe Pottier Appointed President of EPCIA

    3-Phase EMI Filter Design, Simulation, Calculation and Test

    YAGEO Unveils Compact 2.4 GHz SMD Antenna

    KYOCERA AVX Releases Antenna for Iridium Satellite IoT Applications

    Molex Releases Industry-First Quad-Row Board-to-Board Connectors with EMI Shields

    Image credit: Samtec

    How to Match the Right Connector with Protocol Requirements

    Smoltek CNF-MIM Capacitors Pass 1,000h Reliability Test

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • VideoFilter
    • All
    • Antenna videos
    • Capacitor videos
    • Circuit Protection Video
    • Filter videos
    • Fuse videos
    • Inductor videos
    • Inter-Connect Video
    • Non-linear passives videos
    • Oscillator videos
    • Passive sensors videos
    • Resistor videos

    Transformer Safety IEC 61558 Standard

    3-Phase EMI Filter Design, Simulation, Calculation and Test

    Transformer Design Optimization for Power Electronics Applications

    Common Mode Chokes Selection for RF Circuits in Next-Generation Communication Systems

    Capacitor Self-balancing in a Flying-Capacitor Buck Converter

    How to Select Ferrite Bead for Filtering in Buck Boost Converter

    Power Inductors Future: Minimal Losses and Compact Designs

    Percolation Phenomenon: Degradation of Molded Power Inductors in DC/DC Converters

    Connector PCB Design Challenges

    Trending Tags

    • Capacitors explained
    • Inductors explained
    • Resistors explained
    • Filters explained
    • Application Video Guidelines
    • EMC
    • New Products
    • Ripple Current
    • Simulation
    • Tantalum vs Ceramic
  • Knowledge Blog
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • NewsFilter
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest

    Transformer Safety IEC 61558 Standard

    ESR of Capacitors, Measurements and Applications

    Murata Christophe Pottier Appointed President of EPCIA

    3-Phase EMI Filter Design, Simulation, Calculation and Test

    YAGEO Unveils Compact 2.4 GHz SMD Antenna

    KYOCERA AVX Releases Antenna for Iridium Satellite IoT Applications

    Molex Releases Industry-First Quad-Row Board-to-Board Connectors with EMI Shields

    Image credit: Samtec

    How to Match the Right Connector with Protocol Requirements

    Smoltek CNF-MIM Capacitors Pass 1,000h Reliability Test

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • VideoFilter
    • All
    • Antenna videos
    • Capacitor videos
    • Circuit Protection Video
    • Filter videos
    • Fuse videos
    • Inductor videos
    • Inter-Connect Video
    • Non-linear passives videos
    • Oscillator videos
    • Passive sensors videos
    • Resistor videos

    Transformer Safety IEC 61558 Standard

    3-Phase EMI Filter Design, Simulation, Calculation and Test

    Transformer Design Optimization for Power Electronics Applications

    Common Mode Chokes Selection for RF Circuits in Next-Generation Communication Systems

    Capacitor Self-balancing in a Flying-Capacitor Buck Converter

    How to Select Ferrite Bead for Filtering in Buck Boost Converter

    Power Inductors Future: Minimal Losses and Compact Designs

    Percolation Phenomenon: Degradation of Molded Power Inductors in DC/DC Converters

    Connector PCB Design Challenges

    Trending Tags

    • Capacitors explained
    • Inductors explained
    • Resistors explained
    • Filters explained
    • Application Video Guidelines
    • EMC
    • New Products
    • Ripple Current
    • Simulation
    • Tantalum vs Ceramic
  • Knowledge Blog
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

Supercharging the future

29.3.2018
Reading Time: 4 mins read
A A

Source: Euronews article

From powering electric cars to storing renewables, revolutionising the way we hold on to energy remains vital if we are to ween ourselves off fossil fuels and decarbonise the economy.
Batteries and other energy storage devices, such as supercapacitors or ultracapacitors, are seen as crucial to this and by 2025, Europe’s battery sector is expected to be worth a massive quarter of a trillion euros annually.

RelatedPosts

Transformer Safety IEC 61558 Standard

ESR of Capacitors, Measurements and Applications

Murata Christophe Pottier Appointed President of EPCIA

Unlike batteries, which store energy chemically and hold on to it far longer, ultracapacitors can be charged quickly and are good at providing rapid bursts of power. Currently such devices are used to start car engines. They can also provide top-up power when balancing supply and demand on national electricity grids.

Featured Euronews video can be seen here.

The problem with ultracapacitors, however, is that they cannot store nearly as much energy as batteries, which means they soon run out of juice.

This isn’t a big issue when an ultracapacitor is being used to charge a small device like a power tool, which can be recharged in a matter of seconds. Things get complicated, however, when it comes to electric cars or buses. Recharging every few kilometres is neither desirable nor practical.

A game changing device that can bridge the gap between batteries and ultracapacitors has therefore become a major quest for researchers in the energy storage field.

Professor Andrea Balducci, Friedrich-Schiller-University of Jena in Germany admits, in the short-term at least, we are likely to see a combination of lithium-ion batteries and ultracapacitors in electric devices, particularly in cars.

“Most likely we will not just have one device, but we’ll have more of them because we’ll need to fulfill more needs. For energy application, batteries will be the device of choice. For high-power application we need other devices like supercapacitors.”

One firm working to make fast charging ultracapacitors last longer is Skeleton Technologies. Its products are used in hybrid vehicles, especially buses and trucks. The European Space Agency is also a customer; using Skeleton’s ultracapacitors in its satellites.

The company’s CEO Taavi Madiberk says the company’s ultracapacitors can deliver four times more power than anything else currently on the market, thanks to its special graphene material.

“What sets us aside from the competition is that we have brought on the market a technology which has four times more power density and up to two times higher energy density, and the secret sauce behind it is a curved graphene material. In one gram of this material, the surface area is 2,000 square metres, meaning that if you take two grams of this material, it’s the size of a football field.”

In addition to super-fast charging, another advantage ultracapacitors have over batteries is their life cycle, with charges and discharges of up to a million times.

The European Commission recently launched a 10 million euro prize to help develop a new battery for eVehicles. The challenge is to develop a battery or energy storage system that is able to be charged in a few minutes and allows the same driving range as standard cars.

Madiberk thinks such an exciting prospect is only a question of time and could be a reality within the next decade.

“Elon Musk has said ultracapacitors, not batteries will be the future of electric vehicles. If you look at the future for the next 5 to 10 years, then ultracapacitors will be used as a fast charging unit. And imagine if you go to a charging station, you can literally charge your electric vehicle in a matter of seconds and have the initial driving range that you need to get home or to work.”

While the environmental benefits are obvious, Professor Balducci says the economic boost from such technologies will also be huge.

“All these applications require new devices and these devices require new technology and this will bring new places of work and new business. This is actually one of the biggest businesses in the future, most likely.”

Thanks to financial support from the European Investment Bank and the EU’s SME fund, Skeleton recently opened its new factory near Dresden, creating 50 new jobs. The package totalled around €17.5 million.

Madiberk says such public backing is vital if we are to develop cleaner technology.

“I think that the policy, what’s been in place, has been of strong support. Because even if you look at Tesla, some of the people don’t know this but Tesla, without the half billion dollar loan from the Department of Energy, would not exist today. So I think in terms of clean technologies our public policy is really important.”

Madiberk also insists that Europe must not be left behind by the US and Asia when it comes to finding new energy storage systems, though remains optimistic about the future.

“Why was Skeleton Technologies brought to life? We are here to help to save energy and reduce C02 emissions. So ultracapacitors will have a major impact in a number of industries, from bus and truck, green and renewables, industrial equipment and electric vehicles, to make electrification cheaper and to bring it to more people. This will not solve all of our problems but it’s an important stepping stone in terms of fighting climate change.”

Related

Recent Posts

ESR of Capacitors, Measurements and Applications

7.11.2025
10

3-Phase EMI Filter Design, Simulation, Calculation and Test

6.11.2025
23

YAGEO Unveils Compact 2.4 GHz SMD Antenna

6.11.2025
6

KYOCERA AVX Releases Antenna for Iridium Satellite IoT Applications

6.11.2025
8

Smoltek CNF-MIM Capacitors Pass 1,000h Reliability Test

6.11.2025
9

Capacitor Lead Times: October 2025

6.11.2025
50

Paumanok Unveils Aluminum Capacitor Foils World Markets Study 2025-2030

6.11.2025
13

Coilcraft Introduces Ultra-Low Loss Shielded Power Inductors

6.11.2025
13

Murata Expands High Cutoff Frequency Chip Common Mode Chokes

5.11.2025
9

Microhardness — the Hidden Key to Understanding MnOx Cathode Quality in Tantalum Capacitors

3.11.2025
23

Upcoming Events

Nov 11
17:00 - 18:00 CET

Industrial Applications Demand More from Interconnects in Next-Gen Designs

Nov 12
11:00 - 12:00 CET

PCB Design: Impedance is for everyone!

Nov 12
November 12 @ 12:00 - November 13 @ 14:15 EST

Microelectronic Packaging Failure Modes and Analysis

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Ripple Current and its Effects on the Performance of Capacitors

    3 shares
    Share 3 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • Dual Active Bridge (DAB) Topology

    0 shares
    Share 0 Tweet 0
  • What is a Dielectric Constant and DF of Plastic Materials?

    4 shares
    Share 4 Tweet 0
  • SEPIC Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Flying Capacitors

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© EPCI - Leading Passive Components Educational and Information Site

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • PCNS

© EPCI - Leading Passive Components Educational and Information Site

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.
Go to mobile version