Passive Components Blog
No Result
View All Result
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Stackpole RPCQ thick-film chip resistors in rectangular surface-mount packages with end terminations

    Stackpole Releases Pulse-Withstanding Chip Resistors up to 4 W

    Bourns CRT-G thin film chip resistor illustration with a rectangular body and metallic end terminations

    Bourns Introduces Precision Thin Film Resistors for Measurement

    Würth Elektronik ABC of Thermal Management textbook

    Würth Elektronik Launches ABC of Thermal Management Guide

    Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

    Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

    Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

    Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

    Bourns Releases 450 V DC Bus TVS Diode

    YAGEO Nexensos M422 Pb-free platinum RTD graphic showing the operating temperature range, nominal resistance options and joining methods.

    YAGEO Introduces Pb-Free Platinum RTD Temperature Sensor

    Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

    Tantalum Anode Design Combines Structural Benchmarks and Modeling

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
  • Home
  • News
    • All
    • Aerospace & Defence
    • Antenna
    • Applications
    • Automotive
    • Capacitors
    • Circuit Protection Devices
    • electro-mechanical news
    • Filters
    • Fuses
    • Inductors
    • Industrial
    • Integrated Passives
    • inter-connect news
    • Market & Supply Chain
    • Market Insights
    • Medical
    • Modelling and Simulation
    • New Materials & Supply
    • New Technologies
    • Non-linear Passives
    • Optoelectronics and Isolation
    • Oscillators
    • Passive Sensors News
    • Resistors
    • RF & Microwave
    • Telecommunication
    • Weekly Digest
    VACUUMSCHMELZE VACODUR Max cobalt-iron lamination material illustrated as thin metallic rotor and stator stacks.

    VACUUMSCHMELZE Introduced VACODUR Max Cobalt-Iron Alloy for Motor Laminations

    Stackpole RPCQ thick-film chip resistors in rectangular surface-mount packages with end terminations

    Stackpole Releases Pulse-Withstanding Chip Resistors up to 4 W

    Bourns CRT-G thin film chip resistor illustration with a rectangular body and metallic end terminations

    Bourns Introduces Precision Thin Film Resistors for Measurement

    Würth Elektronik ABC of Thermal Management textbook

    Würth Elektronik Launches ABC of Thermal Management Guide

    Schematic of six-arm nitrene crosslinker joining PEI polymer chains in a free-standing dielectric film.

    Crosslinked PEI Film Capacitor Dielectrics Reach 6 J/cm³ at 200°C

    Conceptual illustration of Peak Nano NanoPlex HDC capacitor dielectric film rolls beside a cast-film production line

    Peak Nano Scales NanoPlex HDC Capacitor Film Production 20-Fold

    Bourns Releases 450 V DC Bus TVS Diode

    YAGEO Nexensos M422 Pb-free platinum RTD graphic showing the operating temperature range, nominal resistance options and joining methods.

    YAGEO Introduces Pb-Free Platinum RTD Temperature Sensor

    Reference tantalum capacitor anode characterization, tantalum anode modeling, process selection and life-test verification.

    Tantalum Anode Design Combines Structural Benchmarks and Modeling

    Trending Tags

    • Ripple Current
    • RF
    • Leakage Current
    • Tantalum vs Ceramic
    • Snubber
    • Low ESR
    • Feedthrough
    • Derating
    • Dielectric Constant
    • New Products
    • Market Reports
  • Knowledge Blog
  • Dossiers
    • Aerospace and Defense Passive Components Dossier
    • AI Hardware Dossier
    • Automotive Dossier
    • Industrial Robotics Dossier
    • Power Converter Dossier
    • Capacitor Dossier
    • Circuit Protection Dossier
    • Inductor Dossier
    • Resistor Dossier
    • Silicon Capacitors and Integrated Passives Dossier
  • Suppliers
    • Who is Who
  • PCNS
    • PCNS 2025
    • PCNS 2023
    • PCNS 2021
    • PCNS 2019
    • PCNS 2017
  • Events
No Result
View All Result
Passive Components Blog
No Result
View All Result

Würth Elektronik Launches Reference Book on DC/DC Converters Design without EMC Surprises

22.5.2024
Reading Time: 2 mins read
A A

Würth Elektronik launches another reference book for power supply engineers: “DC/DC Converter Handbook – SMPS topologies from an EMC point of view”.

The book by the authors – Andreas Nadler, Steffen Schulze, Raphael Specht and Markus Thoss – provides a compact overview of the most important DC/DC converter topologies: buck and boost converters, as well as SEPIC and flyback converters.

RelatedPosts

Würth Elektronik Launches ABC of Thermal Management Guide

Würth Elektronik Releases Common-Mode Chokes for 100 V Data and Power Lines

Würth PowerBusbar PF: Vertical Press-Fit Busbars for PCBs

It contains examples of circuit layouts and tips for selecting storage chokes, capacitors and filter components, as well as for specifying and selecting the suitable components for each topology.

EMC interference sources are clearly itemized. Interference spectra are calculated for the four most common switching regulator topologies and the resulting filter design is presented in detail.

Würth Elektronik’s handbook offers straightforward assistance for DC/DC converter designs together with its REDEXPERT online simulation platform. Estimating conducted interference during the design phase helps prevent bad surprises in the EMC lab.

The book was unveiled at the prestigious power electronics conference APEC 2024 (IEEE Applied Power Electronics Conference and Exposition) in California at the end of February. It is now available in printed form and as an e-book.

Table of contents

  1. General Information
    1.1. Selection of the storage inductors
    1.1.1 Rated current
    1.1.2 Saturation current
    1.2. Core material
    1.3. Selection of suitable capacitors
    1.3.1 Ripple current
    1.3.2 Impedance
    1.3.3 Determining Interference current
    1.4. Input filters for DC/ DC converters
    1.4.1 Input stability criteria
    1.4.2 REDEXPERT – EMC Filter Designer
  2. Calculation of common topologies
    2.1. Buck topology
    2.1.1 Block diagram and general thoughts
    2.1.2 Layout considerations
    2.1.3 Example design
    2.2. Boost topology
    2.2.1 Block diagram and general thoughts
    2.2.2 Example design
    2.3. SEPIC topology
    2.3.1 Block diagram and general thoughts
    2.3.2 Example design
    2.4. Flyback topology
    2.4.1 Block diagram and general thoughts
    2.4.2 Example design
    3.1. Basic formulas of the topologies

Reference book “DC/DC Converter Handbook” (English):

  • SMPS topologies from an EMC point of view, 1st edition, article no. 9999669
  • ISBN 978-3-89929-454-5 (printed version)
  • ISBN 978-3-89929-455-2 (e-book version)

The book can be ordered at www.we-online.com/dcdc-converter-handbook and costs € 14.89.

Related

Source: Würth Elektronik

Recent Posts

Würth Elektronik ABC of Thermal Management textbook

Würth Elektronik Launches ABC of Thermal Management Guide

11.11.2026
30
Würth Elektronik WE-SLSP SMT common-mode choke with a square package and four terminals.

Würth Elektronik Releases Common-Mode Chokes for 100 V Data and Power Lines

4.11.2026
49

AI Server Power Supply Efficiency Under Pulsed Loads

4.11.2026
16
Würth Elektronik ICS PowerBusbar PF vertical PCB busbars with flat metal bodies and press-fit pins.

Würth PowerBusbar PF: Vertical Press-Fit Busbars for PCBs

4.11.2026
48
Murata SWL RF coaxial switch connector measurement diagram and SWL-to-SWJ board-area comparison.

Murata RF Switch Connectors Cut PCB Test-Point Area

29.10.2026
40
Conceptual illustration of a Murata NCU01 surface-mount NTC thermistor beside densely arranged electronic components

Murata World First 008004 NTC Thermistors for Temperature Sensing

20.10.2026
48
Concept illustration of an LTCC antenna module with multilayer ceramic substrate, antenna elements and an integrated beamforming IC

Murata LTCC 6G Antenna Module Demonstrates 135 GHz Operation

15.10.2026
66
Murata electronica 2026 technology preview featuring MGJ2T2 power converters and SCI36LT inertial sensors.

Murata Previews SiC Power and AI Sensors at electronica 2026

6.10.2026
88
Two Murata LLD three-terminal MLCCs beside a metal ruler, showing beige ceramic bodies and silver-coloured terminals.

Murata Begins Production of 0201 Three-Terminal Low-ESL MLCCs for IC Decoupling

30.9.2026
84

Upcoming Events

Nov 24
16:00 - 17:00 CET

Select the Correct Components for Your DC/DC Converter

Dec 1
16:00 - 17:00 CET

Developing low-noise mixed-signal systems

Dec 8
16:00 - 17:00 CET

WE-CCMF: Design Principles, Layout Guidelines and Measurement Results for High-Speed EMI Filtering

View Calendar

Popular Posts

  • Buck Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • September 2026 Interconnect, Passives and Electromechanical Components Market Insights

    0 shares
    Share 0 Tweet 0
  • Boost Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • Capacitor Charging and Discharging

    0 shares
    Share 0 Tweet 0
  • LLC Resonant Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • RF Connector Types: How To Choose the Right One

    0 shares
    Share 0 Tweet 0
  • Passive Low Pass Filters: Fundamentals and EMI Design

    0 shares
    Share 0 Tweet 0
  • Flyback Converter Design and Calculation

    0 shares
    Share 0 Tweet 0
  • MLCC and Ceramic Capacitors

    0 shares
    Share 0 Tweet 0
  • Audio Capacitors: Choosing Capacitors for Crossover Circuits

    0 shares
    Share 0 Tweet 0

Newsletter Subscription

 

Passive Components Blog

© 2015–2026
All rights reserved

  • Home
  • Privacy Policy
  • EPCI Membership & Advertisement
  • About

No Result
View All Result
  • Home
  • Knowledge Blog
  • Dossiers
  • PCNS

© 2015–2026
All rights reserved