Dennis Zogbi, Paumanok Inc. publishes on TTI Market Eye outlook on film capacitors, its technologies, market and applications.
This article analyzes the types, configurations and technologies for both AC film and DC film capacitors.
AC film capacitors include both small and large can polypropylene dielectric plastic film capacitors, including both dry and oil-filled designs for use in electrical systems (motor run, microwave oven, magnetic ballast, power transmission and distribution, low voltage power factor correction and specialty power film capacitors (i.e., DC Link capacitors, furnace, traction, welding, laser, radar PFN and TV transmit).
This article also focuses on DC film capacitors for printed circuit board applications in power supply, lighting ballast, automotive and consumer AV applications and includes 5mm pitch PET film capacitors, AC and pulse film capacitors, interference suppression film capacitors and PPS, PEN and PET film chip capacitors.
Additionally, the article offers the reader a look at the advantages and disadvantages of the use of specific types of plastic films as capacitor dielectrics, including PP, PET, PEN, PPS, PI, PTFE and others.
PLASTIC FILM CAPACITORS: TECHNOLOGY OVERVIEW: 2024
AC FILM CAPACITOR TYPES AND DEFINITIONS
The following list offers the reader a look at the different types, configurations and technologies associated with electrical plastic film capacitors, also generally known as film capacitors because they used wound and stacked plastic film, many instances metallized film, as their primary dielectric material.
Power Transmission and Distribution PFC Capacitors:
High voltage power factor correction PFC capacitors are used in utility grade power transmission and distribution systems where they are applied directly to the power grid to increase the efficiency by which power is transmitted and distributed โ or, in other words โ to correct the power factor of the system.
AC film capacitors used for power T&D applications are generally employed in circuits from between 3kV and 745+kV. Distribution class capacitors are generally pole-mounted, outside plant applications from 3 – 15 kilovolts, while transmission class capacitors operate in both series and parallel to be used in power transmission systems to 745 kilovolts. These massive capacitors employ polypropylene film as their dielectric and are primarily manufactured by major companies who provide turnkey solutions to power utility companies the world over.
Motor Run Capacitors:
Motor run capacitors are consumed in the global AC electric motor markets worldwide. The type of motors that consume motor run capacitors are called split-capacitor motors, and the application of the capacitor is for power factor correction of the motor, so that the motor will run more efficiently. Split capacitor motors are used in air conditioner compressor motors, refrigerator compressor motors and ceiling fans, and the annual success of the AC film capacitor market is generally tied to the annual success of the compressor motor market on an annual basis. The compressor markets are in turn largely tied to new housing construction worldwide.
Industrial Power Factor Correction Capacitors:
The low voltage industrial power factor correction capacitor market is considered an extension of the high voltage power factor correction capacitor market worldwide. However, the voltage requirements are lower than that of power T&D capacitors, and the customer base is also different. Also, the capacitor vendors are more diverse than those supplying the electric utilities with polypropylene capacitor banks. Capacitors consumed in low voltage power factor correction applications are generally rack or wall mounted systems that contain large can polypropylene capacitors in series.
The customer is usually a large corporation that is setting up a major manufacturing plant in the automobile, glass or chemical industries that will operate many large DC motors. In this application, the power coming into the plant must be consistent and efficient with limited transients in order to ensure quality manufacturing at the lowest possible electricity costs. The market driver to this segment of the industry is that some electric utilities offer incentives to manufacturers who demonstrate efficient power consumption, and the capacitors help them achieve their goals.
Lighting Ballast PFC Capacitors (Magnetic and HID):
Polypropylene film capacitors have been historically consumed in two separate markets in the lighting ballast industry: the power factor correction magnetic ballast business and in the high intensity discharge (HID) lighting business. The PFC market for polypropylene capacitors is declining however as residential and business class ballast manufacturers convert their production to electronic ballasts that do not use a polypropylene solution (they use a PET film capacitor or DC film capacitor solution instead).
The growth portion of the magnetic lighting business is for outside lighting due to the high voltages associated with parking lots and streetlights which make it a polypropylene PFC capacitor solution. So, overall, the lighting segment for polypropylene capacitors is declining as it is replaced by electronic ballast, but there is still opportunity for growth in outside lighting, which is generally inefficient and is subject to updating on a worldwide basis (most outside lighting shines light skyward as opposed to the ground).
Microwave Oven Capacitors:
We tend to include the microwave oven capacitors in the power capacitor segment; however, many suppliers view the microwave oven capacitor market as a market by itself due to its distribution channel into residential home appliance markets. The capacitor application in a microwave oven, however, is pulse discharge in nature and extremely high voltage, which qualifies it as a traditional pulse discharge capacitor. The microwave oven capacitor market is under tremendous price pressure globally due to the high rates of saturation of microwave ovens in establish global economies. Therefore, most traditional manufacturers of microwave oven capacitors have abandoned the segment in favor of more profitable capacitor end-use markets.
Power Film Capacitors (Snubber, Commutation, Filter, Pulsed Power):
Power film capacitors represent the fastest growth businesses for AC film capacitors over the next five years. It is generally considered a basket category for a variety of AC film capacitor products that are finding good growth opportunities, primarily in renewable energy systems (wind, solar, HEV, ocean wave generation, hydrothermal), external defibrillators, variable speed drives, welding capacitors, furnace capacitors and traction capacitors for electric rail.
True power film capacitors are generally used for one of three applications: snubber capacitors, commutation or pulse discharge (which is why microwave oven capacitors are considered an offshoot of this segment). The most important aspect of this market to understand is that the applications are unique and not considered to be power factor correction but used primarily for actuated burst power. The following capacitors are subsets of the power film capacitor dub-category and are in many instances advertised separately by manufacturers of capacitors.
DC Link Capacitors:
Power Film capacitors are used in the DC link circuit for wind power generation and in solar DC links as well and as snubber capacitors for protection of the IGBT semiconductors used in the control circuits. They are also used in the DC links found in hybrid electric vehicles and in emerging renewable energy systems such as geothermal and ocean wave generation technologies.
Traction Capacitors โ Electric Rail Capacitors:
Power film capacitors are used in the DC link circuit in high-speed trains and mining rail systems.
Industrial Conveyer Capacitors:
Conveyor systems for manufacturing and baggage handling use variable speed drives that require power film capacitors.
Furnace Capacitors โ Induction Heating:
Power film capacitors are used for burst power in industrial furnaces. This is a unique market segment.
Welding Capacitors โ AAT:
Pulse/discharge capacitors are DC circuit capacitors that absorb or supply strong current surges. They are charged sporadically and briefly discharged in relation to the charge time or vice versa. Discharge capacitors are subjected to high loads, high field strength corresponding to the required high energy density, large peak currents because of the fast discharge, generating considerable mechanical forces in large capacitors and high AC voltages on inductive loads as a result of overshoot.
Power Smoothing Capacitors:
Smoothing capacitors are used to reduce the AC capacitor of pulsating DC voltage in measurement devices, control equipment and telecommunications infrastructure equipment, high voltage test instruments and cascade circuitry. These capacitors are predominantly DC in nature. Power supplies are used in a variety of applications and are predominantly AC/DC converters (70%) and DC/DC converters (30%).
- Power Supplies/Inverters/Converters/Chargers/UPS
- Telecom Infrastructure
- Battery Chargers (Auto, Industrial, Railroad)
- Ignition Speed Controllers
- Amplifiers
- Magnetizing Equipment
- Motor Drives
- Inverters
- Electric Vehicle Power Conversion
Additional Specialty Niche Markets for Power Film Capacitors:
Pulse capacitors find their niche in various forms of research & development for generating strong magnetic fields; for high-energy light flashes; high temperature and high pulses of electrical energy (i.e., defense rail-gun and external defibrillator):
- Laser (Industrial and Medical)
- Defibrillator (External Use Only, Medical)
- X-Ray Machines (Pulsed, Laboratory, Medical)
- Ultrasonics (Pulse Welders, Cleaners, Industrial)
- Airport Runway Strobes (Pulse Forming Networks, Aviation)
- Railgun (Defense)
- Pulse Forming Networks (Radar, Aerospace)
- Missile Power Up (Defense)
- Food Sterilization (Commercial, Industrial)
- Marx Generators (Laboratory)
DC FILM CAPACITOR TYPES AND DEFINITIONS
There are four major sub-segments to the DC film capacitor markets worldwide. These include the 5mm metallized PET film capacitors, which are used for general purpose smoothing in audio and video circuits, the AC and pulse specialty film capacitor, which are used in degaussing circuits for CRT monitors and some power supply and lighting markets, the interference suppression type for X and Y circuit applications (otherwise known as safety capacitors) and the DC film chip, which uses new ultra-thin dielectrics of PPS or PEN film and which are used for LCD backlighting and for power smoothing applications where volumetric efficiency is required.
General Purpose PET Film Capacitors (P5 Inductive):
The primary markets for general-purpose PET film capacitors are in TV and PC monitors and in lighting ballasts. Other applications are diverse but center around consumer electronic applications with emphasis upon consumer and car audio applications and in switchmode power supplies. The P5 Inductive GP PET film capacitors account for the majority of demand.
Interference Suppression Safety Capacitors (X/Y):
International governing agencies such as Underwriterโs Labs (UL 1414 and 1283), Canadian Standards Association (CSA C22.2 No. 1 and No. 8), IEC (950 and 384-14) and European Community (EN60950 and EN32400) require that radio frequency interference (RFI) that emanates from most electrical devices be limited to acceptable levels. The preferred method of limiting RFI is by incorporating a film or a ceramic capacitor in line-to-line and/or line-to-ground applications.
There are two main types of interference suppression safety capacitors, which are the X versions and the Y versions. These designations are the result of standards set by various international governing agencies mentioned in the introduction. In short, X capacitors are line-to-line capacitors used to suppress radio frequency interference in electrical systems and the Y capacitors are line-to-ground capacitors used to suppress radio frequency interference in electrical systems.
Type X Capacitors: Otherwise known as a line-to-line capacitor, these devices are used to suppress radio frequency interference (RFI) in electronic systems and are placed on the line between the main line and the neutral wires. X capacitors will generally have low capacitance values anywhere between 0.1 and 1.0ยตF
Class X1 Capacitors: The X1 type interference suppression capacitors are used in industrial computer or industrial lighting ballast applications, which are connected to a 3-phase line (connection to main power trunk lines within a building). These capacitors must be tested by an impulse of 4.0kV or higher if their values are less than 1.0ยตF.
Class X2 Capacitors: This is the most common class of X2 capacitor because it is used in interference suppression applications when line voltages are from 150 to 250 VAC (nominal). This covers suppression of interference on electrical and electronic devices connected to common AC wall outlets. On a global basis this includes many products, such as personal computers, fax machines, hair dryers and other common devices. These devices are impulse tested to 2.5kV if their values are 1.0ยตF and less.
Type Y Capacitors: Otherwise known as a line-to-ground capacitor; these capacitors are placed on the line leading from the main line to the chassis ground or on the neutral line to the chassis ground. Y capacitors have small capacitance values to limit the 50 or 60Hz leakage current to the ground. The 4700 pF type Y capacitor is a common value.
Class Y1 Capacitors: The Y1 type of capacitor is suitable for line voltages up to 250 VAC and are impulse tested up to 8kV. The application is usually when the requirement for bridging double insulation (or reinforced insulation).
Class Y2 Capacitors: This is the most popular type of Y class interference suppression capacitor. It is used to bridge basic and padded insulation with line voltages up to 250 VAC. The primary application is in power supplies used in personal computing equipment. These devices are impulse tested to 5kV.
AC and Pulse Film Capacitors:
AC and pulse film capacitors are used in high voltage applications where extremely low dissipation factors, very small inherent temperature increases, high pulse environment and resistance to corona are required. The environments in which AC and pulse capacitors are required include television set deflection circuits in cathode ray tube type designs, including the important flyback and S-correction (hold) circuits, electronic ballasts, switch mode power supplies (SMPS) and other applications where high current and high frequency are factors of the electronic system. AC and pulse capacitors require high voltages and comparably low capacitance values. Typical voltages are in the 250 to 2000Vdc (or 160 to 600VAC) with capacitance values from 0.001 to 3.3ยตF. Because of the high voltage requirements, dielectrics of polypropylene are used.
Moreover, since high voltages and low capacitance values are required in the applications where AC and pulse capacitors are used, dielectric selection is limited to the electrostatic capacitors, such as film and ceramic capacitors. Film is preferred in television set, ballast and SMPS applications because of its โself-healingโ properties. AC and pulse film capacitors are almost exclusively radial leaded, box type capacitors with variations in dielectric and lead type. Dielectrics are typically metallized polypropylene, double metallized polypropylene or film/foil constructions where the film is polypropylene and the foil is predominantly tin, copper or aluminum.
In television and PC monitor applications, there is a general preference among set designers to employ metallized PP film and foil constructions in S-correction and flyback transformer applications. However, recently we have noted a trend towards metallized and double metallized PP film constructions for the S-correction application. This trend, however, is not affecting the flyback transformer application, which remains film/foil.
Unfortunately, AC and pulse film capacitors are not required for use in LCD monitors; therefore, they have undergone and will continue to undergo a substantial drop in demand from the display manufacturers as they convert their production output from CRT to flat panel display. The remaining demand will become increasingly competitive with substantial price reductions and a smaller overall value market going forward.
SMD Film Chip:
To prevent the switchmode power supply filtering market from migrating away from standard 5 mm PET film capacitors to surface mount multilayered ceramic chip capacitors, the film capacitor industry has invested millions of dollars in the development of a film chip capacitor that has the following attributes:
- Readily Surface Mountable
- Withstands Soldering Temperatures
- Priced in Accordance with Leaded Versions
PLASTIC DIELECTRICS
The plastic dielectrics are many because of the ease of manufacturing metallized film into capacitors through machine-winding. Polypropylene and polyester terephthalate are the two primary plastic dielectrics. However, there are eight additional metallized film variations. See Figure 2.0.
- PP-Polypropylene: This dielectric is associated with all โelectricalโ systems. The metallized PP film versions are for applications in motor run, X&Y circuits, snubber capacitors and for pulse discharge applications. However, also there is the hazy PP film markets in power transmission and distribution capacitors as well.
- PET-Polyethylene Terephthalate: This dielectric is used in capacitors metallized and is designed for high voltage applications in line voltage equipment such as monitors, power supplies and lighting ballasts.
- PEN-Polyethylene Napthalate: This is a dielectric for capacitors available in standard and high voltage configurations. It is niche for chip film capacitors and is consumed primarily for backlighting in monitors and screens.
- PPS-Polyphenylene Sulfide: This is a high temperature dielectric film used for automotive and industrial applications and also in a chip format.
- PI-Polyamide: An alternative to PTFE for space applications.
- PS-Polystyrene: An alternative to polycarbonate for defense, mil-spec alternatives and industrial variants.
- PTFE-Polytetrafluoroethylene: A specialty plastic dielectric film consumed in space capacitor applications.
- PC-Polycarbonate: A rare dielectric film with a MIL-SPEC. Hard to manufacture.
- PVDF-Polyvinylidene Fluoride: A rare dielectric film used for pulse discharge applications.
- Siloxane: A rare or emerging high voltage dielectric plastic film.
Further read: What is a Dielectric Constant of Plastic Materials?
SUMMARY AND CONCLUSIONS
The global market for plastic film capacitors is complex and highly fragmented, representing more than 100 manufacturers worldwide. It is broken down into multiple product types, configurations and types of dielectric film, comprising a vast, versatile and highly unique ecosystem.
